All categories/Hat/All-Over Print Unisex Peaked Cap/
All-over Print Product
All-Over Print Unisex Peaked Cap
Fabric composition: Coated fiber
Fabric Name: Coated with small twill on both sides
Production time(90%): 2-3Day
Weight: 80g
$5.99
Shipping fees：$4.22
Color:
Size:
Our promise: Delivery within 24 hours at the fastest, with overtime guarantee!
It can be washed by hand or machine. Do not soak for a long time. Do not bleach. The temperature of the washing solution should not exceed 45 ºC.
Stretch
NonSlightMediumHigh
*This data was obtained from manually measuring the product, it may be off by 2-3 CM.
How to Measure the Product`s Size
1
Average Size
Maximum circumference of the head
Print files guideline
1、Print files requirements
Only JPG and PNG formats with at least 150 DPI files can be uploaded. CATKISSFISH supports uploading images in bulk, but only for the files within 120 MB, with resolution within 10000px *10000px
2、Print Quality and DPI Instructions
Print quality refers to the printing effect of materials with minimal DPI in the designing area. Its limit is 200-300DPI in CATKISSFISH.
Printing DPI(the numbers of pixels per inch) is limited to the resolution(the number of pixel) and the effect of stretching.
So, stretching space will be larger if the picture has higher resolution under the condition of great printing effect.
3、Practical Pieces’Size
CATKISSFISH pieces’ max size is 12416*8647px.
The practical pieces’ max size is shown in the center of the designing page like belowing:
4、Printing Files Source
You can upload local printing files as materials or use the images from CATKISSFISH designing library for free. Click ‘Open’ to check free designing library as follows:
Uploading local images:
CATKISSFISH designing library:
Design Tips
1、Safe & Stitching Area
Safe Area:
It refers to the major display part of the end product. The design in this area won’t be sewn up during the stitching process.
Stitching area:
Design in this area will be sewn up during stitching process.
2、Logo safety Area
Please make sure to keep the logo far away from the stitching line while designing
As shown below, the logo which is within the safe print area stays too close to the stitching line. Within the allowable range of production error, this may affect logo’s integrity after producing.
Therefore, please leave enough margin between logo and stitching line before completing designing.
3、Full-Bleed Images
To guarantee end products’ integrity and beauty, please use full-bleed images.
Full-bleed image: It's usually recommended to upload designs beyond the edges of the canvas design area, so that there is no blank after stitching or cutting.
Error 1 : The image fits the whole design area.
Although the image can completely cover the canvas design area, it may still appear blank while cutting.
Error 2: The image fits the stitching line.
Within the allowable range of production error, there may exist blank area and the hem is not beautiful.
Full-bleed image: It's usually recommended to upload designs beyond the edges of the canvas design area, so that there is no blank after stitching or cutting.
Error 1 : The image fits the whole design area.
Although the image can completely cover the canvas design area, it may still appear blank while cutting.
Error 2: The image fits the stitching line.
Within the allowable range of production error, there may exist blank area and the hem is not beautiful.
Therefore, full-bleed image is
recommended, as below
recommended, as below
4、Imagemosaic On Canvas
When it comes to poor quality after amplifying the image, some users may duplicate the image and then mosaic them, as shown below. It may cause an invisible white line on the generator. But it’s
obvious when putting into production.
Therefore, it’s not recommended to mosaic images on generator. If you do have the need, pls use “Tilling” function.
obvious when putting into production.
Therefore, it’s not recommended to mosaic images on generator. If you do have the need, pls use “Tilling” function.
5、3D & 2D Mockup
Problems caused by 3D and 2D mockup difference;
When 3D mockup is incompatible with 2D mockup, the real printing effect refers to 3D rendering.
When 3D mockup is incompatible with 2D mockup, the real printing effect refers to 3D rendering.
Fashionable appearance: fashionable design, loose board design, which can be suitable for all bodies, and can be matched with various clothes. It will be a must-have item for your fashion. Gifts: perfect birthday, Thanksgiving, Christmas and New Year gifts for family or friends. Is a must-have fashion piece.
Note: This product is in European code. If you have any questions, please contact the customer service. This size data is measured under the tile. Due to different measurement methods, the error within 1-2cm is normal. Please do not use the same color as the bottom color of the clothes for the design pictures. The ink will not be produced during production and will not be included in the after-sales treatment.
It is suitable for different occasions such as daily life, work, travel, and parties. Makes you stand out from the crowd
Explore the reviews of other users (Reviews)
0.0/5
No more~
Find out more
Discover CATKISSFISH's complementary services and unique culture!
